You are here:>>Products

FMC 10 series digital microwave bistatic detector (ranges up to 50, 100 and 200m)

FMC 10 series microwave detectors used to guard the surrounding territory of the object.forteza europe
DISTINCTIVE FEATURES:

  • The multi-threshold operation algorithm provides a high resistance to outdoor disturbances;
  • 4 independent channels, which allows to avoid the nearby zones affect each other;
  • Possible sensor adjustment without tools (using build in switches);

Using a computer with software:

  • Interference or environmental visualization and analysis in (vegetation, animals, car, etc.);
  • Operating signal (mV) visualization, more detailed positioning of the transmitter and the receiver;
  • Flexible sensitivity settings, applying sensors to the existing protection zone;
  • You can adjust the speed of movement of the offender in detection zone.
Read more...
  • Click to Ask more info

FMC 24 series digital microwave bistatic detector (ranges up to 50, 100 and 200m)

FMC 24 series microwave detectors used to guard the surrounding territory of the object.forteza europe
DISTINCTIVE FEATURES:

  • The multi-threshold operation algorithm provides a high resistance to outdoor disturbances;
  • 4 independent channels, which allows to avoid the nearby zones affect each other;
  • Possible sensor adjustment without tools (using build in switches);

Using a computer with software:

  • Interference or environmental visualization and analysis in (vegetation, animals, car, etc.);
  • Operating signal (mV) visualization, more detailed positioning of the transmitter and the receiver;
  • Flexible sensitivity settings, applying sensors to the existing protection zone;
  • You can adjust the speed of movement of the offender in detection zone.
Read more...
  • Click to Ask more info

FORTEZA 24 series microwave bistatic detector

Microwave Bistatic Detectors "Forteza" with narrow detection zone.forteza
Frequency 24 GHz.
The purpose of local protective microwave detectors of "Forteza200", "Forteza100", "Forteza50", families (hereinafter referred to as the detector) is to protect perimeter sectors of different sites. The high frequency of the microwave module permits to narrow the detection zone.

 

Read more...
  • Click to Ask more info

FMW series microwave bistatic detector

Microwave Bistatic Detectors "FMW" Frequency 9.4 GHz.forteza
The purpose of local protective microwave detectors of "FMW" series families (hereinafter referred to as the detector) is to protect perimeter sectors of different sites.
Read more...
  • Click to Ask more info

Forteza Fonar

Microwave Bistatic Detectors "Fonar" hidden in plastic lanterns or other plastic case. Detection zone up to 75m.forteza
The detector “Fonar” is intended to protect perimeter sectors of summer cottages, cottages, offices and other sites as well as to generate alarms when an intruder crosses a detection zone. Alarms are generated using “dry” contacts.

Read more...
  • Click to Ask more info

Forteza ANT

Microwave Bistatic Detectors "FORTEZA ANT" hidden in plastic lanterns or other plastic case. Detection zone up to 40 m.forteza
The microwave sensor “Forteza ANT” is intended to protect cottages, offices, office buildings, different objects which have strong requirements to the appearance or to the security masking. “Forteza ANT” is to protect the perimeter sites and to light a territory.
Read more...
  • Click to Ask more info

Forteza FM-60 (24)-BT Monostatic detectors for perimeter protection with Bluetooth, CE

The microwave monostatic sensors Forteza FM-60 (24)-BT used for the protection of individual sections of the perimeter, where the use of two-position detectors is difficult orforteza impossible, such as deadlocks, marshy areas, ravines, crossing guard, storage areas, tunnels, bridges, overpasses, etc.
DISTINCTIVE FEATURE
  • Alignment of the sensitivity along the entire length of the detection zone makes it possible to clearly define its borders, and to increase the noise immunity of the movement of people and vehicles outside the detection zone. This is the main and most important difference of Forteza FM-60 (24)-BT detectors from the other Doppler detectors.
  • The division of the detection area of 12 sub-zones allows the sensitivity adjustment of each of them individually. In each sub-zone sets its signal gain and the threshold level that can be adapted for a specific detector noise conditions at the site.
  • Each sub-zone can be adjusted using a PC via USB-interface (disconnection of sub-zones, separately sensitivity setting in each sub-zone, Antimasking and so on), remotely via RS-485 or with an Android-Device via Bluetooth.
  • The detectors possible to deactivation one or more sub-zones. Disable them, you can organise "sanctioned" passages zone in the protected area for the free movement of people going through the checkpoint and the free passage of transport through the gate. To improve noise immunity is recommended to disable non-use subzones.

Read more...
  • Click to Ask more info

Forteza FM-30 (24)-BT Monostatic detectors for perimeter protection with Bluetooth, CE

The microwave monostatic sensors Forteza FM-30 (24)-BT used for the protection of individual sections of the perimeter, where the use of two-position detectors is difficult orforteza impossible, such as deadlocks, marshy areas, ravines, crossing guard, storage areas, tunnels, bridges, overpasses, etc.
DISTINCTIVE FEATURE
  • Alignment of the sensitivity along the entire length of the detection zone makes it possible to clearly define its borders, and to increase the noise immunity of the movement of people and vehicles outside the detection zone. This is the main and most important difference of Forteza FM-30 (24)-BT detectors from the other Doppler detectors.
  • The division of the detection area of 12 sub-zones allows the sensitivity adjustment of each of them individually. In each sub-zone sets its signal gain and the threshold level that can be adapted for a specific detector noise conditions at the site.
  • Each sub-zone can be adjusted using a PC via USB-interface (disconnection of sub-zones, separately sensitivity setting in each sub-zone, Antimasking and so on), remotely via RS-485 or with an Android-Device via Bluetooth.
  • The detectors possible to deactivation one or more sub-zones. Disable them, you can organise "sanctioned" passages zone in the protected area for the free movement of people going through the checkpoint and the free passage of transport through the gate. To improve noise immunity is recommended to disable non-use subzones.

Read more...
  • Click to Ask more info

Forteza FM-60 (24) Monostatic detectors for perimeter protection

The microwave monostatic sensors Forteza FM-60 (24) used for the protection of individual sections of the perimeter, where the use of two-position detectors is difficult orforteza impossible, such as deadlocks, marshy areas, ravines, crossing guard, storage areas, tunnels, bridges, overpasses, etc.
DISTINCTIVE FEATURE
  • Alignment of the sensitivity along the entire length of the detection zone makes it possible to clearly define its borders, and to increase the noise immunity of the movement of people and vehicles outside the detection zone. This is the main and most important difference of FORTEZA FM-60 detectors from the Doppler detectors.
  • The division of the detection area of 12 sub-zones allows the sensitivity adjustment of each of them individually. In each sub-zone sets its signal gain and threshold level that can be adapted for a specific detector noise conditions at the site.
  • The detectors possible to deactivation one or more sub-zones. Disable them, you can organize "sanctioned" passages zone in the protected area for the free movement of people going through the checkpoint and the free passage of transport through the gate. To improve noise immunity is recommended to disable non-use subzones.
Read more...
  • Click to Ask more info

Forteza FM-30 (24) Monostatic detectors for perimeter protection

The microwave monostatic sensors Forteza FM-30 (24) used for the protection of individual sections of the perimeter, where the use of two-position detectors is difficult orforteza impossible, such as deadlocks, marshy areas, ravines, crossing guard, storage areas, tunnels, bridges, overpasses, etc.
DISTINCTIVE FEATURE
  • Alignment of the sensitivity along the entire length of the detection zone makes it possible to clearly define its borders, and to increase the noise immunity of the movement of people and vehicles outside the detection zone. This is the main and most important difference of FORTEZA FM-60 detectors from the Doppler detectors.
  • The division of the detection area of 12 sub-zones allows the sensitivity adjustment of each of them individually. In each sub-zone sets its signal gain and threshold level that can be adapted for a specific detector noise conditions at the site.
  • The detectors possible to deactivation one or more sub-zones. Disable them, you can organize "sanctioned" passages zone in the protected area for the free movement of people going through the checkpoint and the free passage of transport through the gate. To improve noise immunity is recommended to disable non-use subzones.
Read more...
  • Click to Ask more info

Forteza FM-30 Monostatic detectors for perimeter protection

The microwave monostatic sensors "FM-30", are intended to protect perimeter sites, open and closed grounds, storehouses, tunnels, platforms.forteza
DISTINCTIVE FEATURE
  • The division into 12 subzones permits to increase the interference immunity to birds, small animals and weather conditions within the detection zone in comparison with other similar microwave monostatic sensors.
  • All settings can be controlled or changed with a control device or with a PC. The sensor is connected with a PC through USB. The disconnection of one or some subzones permits to organize “approved” passages, e.g. for people’s passages through control posts or transport passing through gates.
  • The “ANTI-MASKING” function is used to determine an intentional deactivation.
  • In the case of sensor outdoor operation it is recommended to buy a special visor with the aim to reduce the influence of weather conditions (rain and snow).
Read more...
  • Click to Ask more info

Forteza FM-60 Monostatic detectors for perimeter protection

The microwave monostatic sensors "FM-60-C", "FM-60-V", "FM-60-F" are intended to protect perimeter sites, open and closed grounds, storehouses, tunnels, platforms.forteza
DISTINCTIVE FEATURE
  • The division into 12 subzones permits to increase the interference immunity to birds, small animals and weather conditions within the detection zone in comparison with other similar microwave monostatic sensors. All settings can be controlled or changed with a control device or with a PC. The sensor is connected with a PC through USB.
  • The disconnection of one or some subzones permits to organize “approved” passages, e.g. for people’s passages through control posts or transport passing through gates.
  • The “ANTI-MASKING” function is used to determine an intentional deactivation.
  • In the case of sensor outdoor operation it is recommended to buy a special visor with the aim to reduce the influence of weather conditions (rain and snow).
Read more...
  • Click to Ask more info

FORTEZA-1000E Quickly deployable microwave complex

Quickly deployable microwave complex FORTEZA-1000E is intendedforteza for the temporary protection of perimeter sites, plane parking, car parking and other mobile objects in the absence of a constant-current source. The complex is also intended for the intrusion detection by transmitting an alarm via radio channel to the control post located up to 5000 m away.

Read more...
  • Click to Ask more info

Forteza PDS Quick-adjusting microwave alarm system

Quick-adjusting microwave alarm system Forteza PDS is designefortezad for building of temporary security borderlines with total range up to 2000 m. Complex can be used for the perimeter protection of stationary objects. The complex is also intended for the intrusion detection by transmitting an alarm via RS-485 radio channel, GSM or other wireless networks to the control post.

Read more...
  • Click to Ask more info

Relief perimeter protection system

Wire-wave linear sensor "RELIEF" is intended to protect different perimeter sites and to generate an alarm in case of a detection zone intrusion. 25 ... 250 metersforteza
Read more...
  • Click to Ask more info

Forteza Tribo-M processing unit (TRIBO-M)

Intended for the protection of any types of fences from an intrusion by means of climbing over or destroying them. Protected objects: barb wire barrier, coil AEE, mesh wire forteza europeNNOI, wooden, brick, ferroconcrete, steel barrages; metal grates; roofs of buildings, hangars, gates; trees growing close to the protected barriers.
Read more...
  • Click to Ask more info

Fence protection system TRIBO-S (4)

WHAT IS IT?forteza europe
The system is intended for the protection of any type of fences from climbing over or destruction. An intruder will be detected before the entering in to the important object territory. Security personnel can respond immediately to violations and to stop the intruder before he committed a crime.
Read more...
  • Click to Ask more info

Fence protection system TRIBO-S (2)

WHAT IS IT?forteza europe
The system is intended for the protection of any type of fences from climbing over or destruction. An intruder will be detected before the entering in to the important object territory. Security personnel can respond immediately to violations and to stop the intruder before he committed a crime.
Read more...
  • Click to Ask more info

Forteza sensitive element (SE-86)

The sensitive element (SE-86) mounted on the fence is meant for electrical signal generation under mechanical or vibration actions on the fence. The sensitive element isforteza europe special cable which is made by FORTEZA technical tasks.

Read more...
  • Click to Ask more info

Non sensitive elements (NON-SE)

Non sensitive elements (NON-SE) intended:  to connect TRIBO-M processing unit with sensitive element; pass the gates or building in the line with fence; arrange specialforteza europe detection zone for the best integration of TRIBO-M with CCTV  system.
Read more...
  • Click to Ask more info

Connection sleeve (CS)

The connection sleeve is meant for connecting the sensitive element together with its non-sensitive element which connected to the signal processing unit for the connectionforteza europe point shielding and sealing.
Read more...
  • Click to Ask more info

End sleeve (ES)

The connection sleeve is meant for connecting the sensitive element together with its non-sensitive element which connected to the signal processing unit for the connection forteza europepoint shielding and sealing.

Read more...
  • Click to Ask more info

Converter RS-485 to USB (RS)

Converter is using to connect TRIBO-M processing unit with computer to set up system parameters.forteza europe
Read more...
  • Click to Ask more info

Plastic ties for fixing points (TIES)

Plastic ties are using to fix sensitive element to the differnt fence. Sensitive element (SE) fixing points is needed to generate electrical signals in sensitive elements when theforteza europe fence is overcome by intruder.
Read more...
  • Click to Ask more info

Forteza Tribo-M system DEMO kit

We offer to buy DEMO kit of TRIBO-M fence protection system for self-studying, showing to clients, demonstrating on exhibitions at special demo-price (significantly lowerforteza europe than retail-price).

Read more...
  • Click to Ask more info

Forteza RS-BL converter RS-485 (USB and Bluetooth)


forteza europe
The converter RS-BL is intended for tuning the communication interfaces of the detector and control panel when adjusting and testing the detector’s operability. The converter is designed for interoperability with the FMC series microwave detectors devices and TRIBO-S fence protection system (over the wire connection line only).
Read more...
  • Click to Ask more info

Contacts

contacts lt
FORTEZA, JSC
  • adress iconTilzes str. 38, 91112 Klaipeda, Lithuania
  • phone iconPhone +370 46 441195
  • fax iconFax +370 46 412231
  • email iconE-mail: forteza@forteza.com

Opening hours:
Monday - Friday from 08:00 till 16:00
Saturday, Sunday - closed

 

contacts ru
OKHRANNAYA TECHNIKA, JSC